Regrip a Golf Club

How to Know When You Should Regrip Your Golf Club

The frequency at which you should regrip your golf club depends on various factors such as the type of player you are and usage.

Recreational Player: If you play golf once a week for leisure or once a month, regripping your club once a season should be sufficient for someone who plays less than 4 hours a week.

Membership Player: If you have a club membership and play a couple days a week, regripping your club more frequently will be beneficial to maintain a good grip on the club. Club members should every two to six months, taking personal discretion into consideration.

Semi-Pro/Pro: The amount of wear and tear the handle sees can dictate when to regrip. Regripping every six weeks to two months can help prevent blisters from constant rearranging of the grip.

For beginners, here is a checklist to determine when to regrip:

  • Has your grip lost its tenacity?
  • Is there any tearing on the grip?
  • Is there any black residue on your hands after playing?

If any of these are a ‘yes’, it may be time to consider regripping. Regripping is an affordable way to rejuvenate your golf club and provide a comfortable hold on the handle once again.

The Benefits of Regripping

  • Cost Effective: Buying a new golf club can be expensive, ranging from $35 to $150. Regripping with a self-fusing silicone wrap like Tommy Tape Grip Wrap can bring your favorite club back to life for only $9.99, even before every game if needed.
  • Custom Grip: With the silicone wrap, you can customize the grip to your preference. There is a lot of variation that can be done with the wrap, allowing you to be creative and wrap it to be thicker or thinner, depending on your preference.
  • Better Hold: With a new tacky grip, you never have to worry about the club slipping out of your hands during a game. This allows you to focus on your swing and technique rather than keeping the club in your hand.

Step by Step Guide on How to Regrip Your Golf Club:

1:

Remove the old grip: Depending on the grip, it can be unwrapped or slid off.

2:

Clean the handle: Check for any dirt or leftover adhesive on the handle and clean it thoroughly. The surface needs to be sleek and flat to perfectly put the grip on.

3:

Prepare the new grip: Take the new silicone wrap out and prepare to wrap it around the club. Peel back about 5 inches of the plastic backing on the wrap. The wrap is self-fusing, so there’s no adhesive mess. However, be cautious not to tangle the wrap while wrapping to avoid fusing and making it difficult to undo.

4:

Wrap the butt: Take the unwrapped part of the grip and wrap it completely around the butt of the handle. Then, begin spinning the club while holding the grip firmly and overlapping the grip as you go. Stretch the grip if you prefer a tighter wrap or keep it loose by not stretching it as far.

5:

Seal the top: Once the grip is wrapped all the way up the handle, make any changes to the top, such as cutting off excess or lumpy sections. Then, wrap silicone tape around the top to seal it and ensure it does not unravel. 

Tommy Tape’s Grip Wrap

Tommy Tape is unique compared to other grips, no adhesive mess, ridges for enhanced grip, and many other advantages. With Tommy Tape Grip Wrap you will be swinging like a pro. Hit a hole in one today by getting our self-fusing grip wrap in our store. 

Regrip a Baseball Bat

Regripping your baseball bat is an important part of maintaining and maximizing its performance. A good rule of thumb is to check the grip on your bat every few months to see if it is starting to wear down or become slippery. If the grip is starting to wear, it is time to regrip your bat. Here are some tell-tale signs it is time to regrip your bat. 

How To Know If It Is Time To Replace Your Grip?

  • Slipping Grip: If you notice that your hands are slipping on the handle of the bat when you swing. A slipping grip can affect your ability to control the bat and may lead to decreased performance.
  • Worn grip: If the grip on your bat looks worn or frayed, it may be time to replace it. A worn grip can be uncomfortable to hold. Also it may not provide the same level of grip as a new one.
  • Persistent Blisters: If you consistently develop blisters on your hands when using your bat. This could be a sign that the grip is too thin or worn down. Regripping the bat with a thicker or more cushioned grip wrap may help to prevent blisters from forming.
  • Difficulty Holding the Bat: If you find it difficult to hold onto the bat comfortably or your hands feel strained when using it.

Why Tommy Tape?

If you have established your bat needs regripping, then see why Tommy Tape silicone grip will be the best option to bring your bat back to life. 

  • Improved Grip: A silicone ribbed grip wrap provides a secure, non-slip grip on the handle of the bat. This allows players to swing with more confidence and control.
  • Enhanced Comfort: The ribbed texture of the grip wrap helps to reduce hand fatigue and strain. Therefore making it more comfortable to hold and swing the bat for extended periods of time.
  • Increased Power: A better grip on the bat can lead to improved bat speed and power, resulting in harder-hit balls and better performance on the field.
  • Customization: Silicone ribbed grip wrap comes in a variety of colors and styles, which will allow players to choose a wrap that matches their personal style or team colors.
  • Durability: Grip wraps are highly durable and resistant to wear and tear. They will last longer than traditional leather or rubber grips.
  • Easy to install: They do not require any special tools or equipment.
  • Cost-effective: Replacing a bat grip can be costly. But regripping with a silicone grip wrap is a much more affordable option.
  • Quick replacement: If a grip wrap becomes damaged or wears out, it can be easily and quickly replaced without the need to replace the entire bat.
  • Weather-resistant: Silicone grip wraps are resistant to water and other environmental factors. Now, making them a reliable choice for all types of weather conditions.

Steps on How to Regrip Baseball Bat?

Tommy Tape is the best option for regripping your bat to give your swing that extra power. Here are a few steps on how to re-grip your bat with Tommy Tape. 

  1. Remove Old Grip and if it is not coming up then use an exacto knife or pocket multitool to strip away at the old material.
  2. Clean the handle of your bat with rubbing alcohol or another cleaning solution to remove any dirt or grime.
  3. Cut the silicone grip wrap to the desired length, making sure it is long enough to cover the entire handle of the bat.
  4. Remove the backing from the silicone grip wrap and carefully apply it to the handle of the bat, starting at the bottom and working your way up.
  5. Apply pressure to the silicone grip wrap, ensuring that it is evenly and securely adhered to the handle.
  6. Trim any excess silicone grip wrap with a sharp knife or scissors.
  7. @tommytape Throw us a follow and grab some grip! #fyp #foryoupage #foryou #tommytape #gripwrap #viral #baseball #sports #game ♬ original sound – Tommy Tape

Now that you know how and when to regrip your bat, go grab some Tommy Tape Grip Wrap and fix your bat! If you want to know about regripping other essential objects head to our Uses page!

Regrip a Tennis Racket

How Do I Know When I Should Regrip My Tennis Racket?

Depending on the type of player you are, you might regrip at different times. 

  • Recreational: These are the players who play once a week or once a month for fun. Changing the grip 1-3 times a season should work for someone who plays less than 4 hours a week. 
  • Membership Player: Club members play a couple hours a week, they will wear out the grip faster, so changing it more frequently is beneficial to maintaining a good grip on the racket. Club members should be changing the grip once a week, depending on the player’s needs of course. 
  • Semi-Pro/Pro: With the amount of wear and tear the handle sees at this level, the grip should be changed before every match and even during. Having a new tacky feel to the grip every game can help prevent players from getting blisters from having to constantly change their grip. 

If you’re a beginner and need to know when to change the grip, try using this checklist:

  • Has your grip lost its tacky feel?
  • Any tearing?
  • Is there a black residue being left on your hands? 

Any of these are a yes? Then it may be time to make a change. Regripping is an affordable way to make your racket feel like new. Replacing the grip can give you a comfortable hold on the handle once again. It is super easy and only takes 3-5 minutes. 

The Benefits of Regripping

  • Cost Effective: Buying a new tennis racket can cost anywhere from $20-$300 and can get expensive fast. Grip loses its tacky feel very quickly depending on use, replacing the grip might be necessary before every game. Regripping the handle with Tommy Tape Grip Wrap costs just $9.99, which is a small price to bring your favorite sports equipment back to life.  
  • Custom Grip: By wrapping the grip, you can make it how you like it. There is a lot of variety in how you can wrap the tape. You could wrap it to be thicker or thinner, and the possibilities are endless. Be creative! 
  • Better Hold: Never worry about the racket slipping out of your hands during a game. You can fully focus on your swing and technique rather than keeping the racket in your hand. 

A Step-by-Step Guide on How to Regrip Your Tennis Racket:

1:

Take off the old grip. If the grip is a wrap, it will need to be unwrapped and taken off. An easier way of getting it off, is using an X-Acto knife or scissors can help take it off. Over grips can be also sleeves but those can slide right off. Is the tennis racquet new? There’s no need to do anything.

2: 

Clean off the handle. Check the bevels for any dirt or leftover adhesive, and clean the handle thoroughly. Get rid of all the bumps, they will be felt through the grip. Make sure to get all the nooks and crannies flattened out. 

3:

Take the new grip out. Prepare to wrap it around the racket. Peel back about 5 inches of the plastic backing on the wrap. The wrap is self-fusing, so there’s no adhesive mess. However, be careful not to let the tape get tangled as you are wrapping, because it will stick together and is hard to separate again. 

4:

Begin wrapping at the butt. Start with the unwrapped part of the grip and wrap completely around the butt of the handle. Then begin spinning the racket while holding the grip firmly and overlapping the grip as you go. With a tighter wrap stretch the grip as you wrap, but if you like it looser you do not need to stretch it as much. 

5:

Seal off the top. Once the grip is wrapped all the way up the handle, make any changes to the top, like cutting off excess or cutting away lumpy sections. Finally, if you have some silicone tape around, seal off the top by wrapping it around the tape to ensure it will not unravel.

Tommy Tape Grip Wrap

Tommy Tape is different from other different tennis grip tapes because there is no adhesive mess, which gives you the advantage compared to other players. Tommy Tape Grip Wrap has a bumpy, tacky feel that can improve every player’s game. This new grip you will be feeling the benefits once you step on the court and take your first swing. Regrip your racket today with our Tommy Tape Grip Wrap and reap all the benefits and beat all your friends. 

Regrip my Pickleball Paddle

How Do I know When To Regrip My Pickleball Paddle

Depending on the condition of the paddle then that determines if it needs to be regripped or not. 

  • Rips: If there are rips or holes in the grip it may be time to replace it.
  • Old: Depending on how often the paddle is used, 2-3 months is a general rule for how often grip should be replaced. But the more someone plays the more frequent the grip needs to be replaced. 
  • Dirty: Overtime there can be dirt build-up and the grip can lose its tacky feel. Replacing the grip frequently can keep the paddle’s grip feeling new. 
  • Dark Hands: From over use the grip can start to wear and leave a black residue on your hands.

If your grip has any of these issues it is time to look at replacing the grip. Take a look at Tommy Tape Grip Wrap as a replacement grip. Pickleball grip is extremely important to play the game.

Difference in Tommy Tape Versus Others

Tommy Tape Grip Wrap Competitor’s Product
✅ Non-Adhesive: Grip wrap is self-fusing and does not require adhesive to stay wrapped around the handle of the paddle. 🗙 Requires Adhesive: Competitors do not self-fuse and require adhesive to stay attached the the paddle. 
✅ Easily Modifiable: Grip wrap can be cut and wrapped in anyway that is comfortable.  🗙 Cannot Modify: Competitors have a guideline and the racket can only be wrapped a certain way and it is hard to cut and customize. 
✅ Ridges to Improve Grip: Ridges and divots help keep control over the paddle for a better swing 🗙 Smooth: A smoother surface loses the grip easier. If the tacky feeling goes then there is no grip. But if the tacky feeling leaves on the tommy tape the ridges still provide grip. 

Step by Step on How to Grip a Pickleball Paddle:

1.

Remove Old Grip: Peel back the old grip and strip it all off. If it is having a hard time coming up then use an X-Acto knife or multitool to strip away at the old material.

2.

Remove adhesive or remaining substance: Examine the handle for any glue or pieces of material left behind. Clean off the handle thoroughly using adhesive remover or whatever is on hand. Be sure to completely clean the handle, whatever is left behind will be felt through the grip. 

3.

Take the new grip out: Prepare to wrap it around the racket. Peel back about 5 inches worth of the plastic backing on the wrap. The wrap is self-fusing, so there’s no adhesive mess. However be cautious to not have the tape get tangled as it is being wrapped because it will fuse and have a hard time coming undone.

4.

Begin Wrapping at the End Cap: Take the unwrapped part of the grip and wrap it completely around the end cap. Then begin spinning the paddle and wrapping the tape and overlapping it as it goes up the handle. Be sure to hold a firm clutch on the excess tape and be sure not to tangle the tape as it is being wrapped because it will get stuck together and fuse. 

5.

Clean up top of racket: Once the pickleball grips is wrapped all the way up the handle, changes might need to be made. Whether to cut at the top and make it even or to cut away at any lumps or bumps. Finally if you have silicone tape, it can be wrapped around the top to seal it off to make sure it will not be unraveled. 

Dumbbell Grip for Weight Lifting

If you have lifted weights before, then you have noticed that dumbbells and barbells get slippery easily, can cause blisters and calluses, and can leave a distinct smell on your hands. Tommy Tape Grip Wrap prevents these things from happening and gives you extra protection. Grip wrap is the perfect dumbbell grip. 

What is the advantage of using Grip Wrap on weights?

  • Lift Heavier: Having a better hold on the weight can lead to being able to lift heavier weights rather than focusing on your grip.
  • Non-Slip Grip: Sweating is obviously the goal, but it can pose a challenge while weight lifting. The weight can start to slip, and rather than focusing on form and mechanics, the focus turns to trying to make sure you don’t drop the weight. This is where the grip wrap comes in and can help create a better hold on the weight. 
  • Prevents Blisters: Weight lifting can be hard on the hands, and over time the repetition of lifting the metal bar can create blisters and calluses. Using the grip wrap will create a tacky surface that provides the right amount of cushioning. 
  • Tacky Surface: Rather than gripping bare metal that slips easy and causes blisters, grip wrap has a tacky surface that works with your hands rather than against them. 
  • Bring Old Weights Back to Life: Older weights can get chipped, rusty and worn over time. Rather than wasting money on buying new ones, putting grip wrap over them can save your old weights. 
  • No Adhesive Mess: Grip tape is a commonly used tool for gym rats who lift. But once the tape gets worn down and they remove it, it leaves behind adhesive that can be tricky to remove. Tommy Tape Grip Wrap is a silicone-based material that self-fuses rather than needing adhesive. It can be easily cut off with an X-Acto knife or scissors and will never leave anything behind. 


Types of weights to use the grip wrap on:

  • Dumbbells: This grip wrap works great on dumbbell grips and gives you complete control over the weight. 
  • Pull-Up Bar: Foam is usually used as a pull-up bar grip, but that can wear and tear easily, whereas our grip stays fused to the bar and does not flake off easily. 
  • Barbell: Barbell grips can be hard to deal with, but the tape is a great substitute and can help increase weight lifting technique for deadlifting, bent over rows, and many more. 

Benefits of Dumbbell Grip Wrap Versus Dumbbell Grips

                                                     

Grip Wrap Dumbbell Grip
✅ Stays in place: Keeps a firm hold on the bar it is wrapped around. 🗙 Pad slips off: The pad is easily slipped on but can just as easily slip off during the workout.
✅ Thinner and flexible: Adds cushion but does not make the bar thicker. 🗙 Too thick: Cannot feel the bar that the grip is attached to. 
Firm: Does not affect the firmness of the bar. 🗙 Too soft: When lifting having a firm surface is important, it can improve strength. 
Customizable: The wrap can form to the shape or length of the bar.  🗙 Not customizable: Grip stays the same shape and cannot be adjusted.
@tommytape Renew your weights rather than buying new ones! #diy #workout #weights #diyproject #fun #fyp #foryoupage #viral #xyzbca #like #follow #comment ♬ Aesthetic – Tollan Kim


 

How to apply dumbbell grip tape to weights:

1.

Clean off the area where the grip will be placed. Spraying it down with some cleaner and wiping it with a paper towel should do the trick. If there are any bumps, they will be felt through the grip, so make sure to get all the nooks and crannies flattened out. 

2.

Take off the plastic backing on the grip tape. Prepare to wrap it around the weight or bar. Peel back about 5 inches of the plastic backing on the wrap. The wrap is self-fusing, so there’s no adhesive mess. However, be careful not to let the tape get tangled as it is being wrapped, because it will stick together and is hard to separate. 

3.

Begin wrapping from one end to the other. Start with one complete overlap rotation, then start overlapping by covering the flat part of the wrap. Continue around the weight until the desired area is covered, finish off with one final overlap rotation then cut it. 

4.

Cut off undesired pieces or clean up the top. Sometimes the wrap at the top can look uneven. Use an X-Acto knife or scissors to cut the wrap and make it even. 

 

With this new grip it will go on easy but come off even easier. Unraveling the grip and leaving behind adhesive and a sticky mess is annoying. Start by, cutting the grip off with scissors or an X-Acto knife and have it done in seconds. Tommy Tape has the best dumbbell grip. 

Reel seat custom clamp for fishing

Fishing Rod with Custom Reel Seat
Making a custom reel seat clamp is as easy as a few wraps!

When setting up a custom fishing rod and reel, many people overlook the reel seat.  The seat is where the reel fastens to the rod itself.  Sensitivity and being able to detect a strike is necessary to successfully land a big catch. Protect your investment and improve comfort for fishing all day without sacrificing sensitivity.

Continue reading